Order No. 267 of the Ministry of Natural resources and Environmental Protection validating the Regulation on fishing gear marking. Pays/Territoire Bélarus Type du document Règlement Date 1997 Source FAO, FAOLEX Sujet Pêche Mot clé Pêche continentale Enregistrement Engins de pêche/méthodes de pêche Marquage/identificacion Gestion et conservation des pêches Aire géographique CEI (Communauté des États indépendants), Europe de l'Est, Europe, Europe et Asie Centrale Résumé Fishing gear used for industrial fisheries must be registered and have identification marking. Marking symbols must be produced at the request of the Fishing Inspection for the subsequent distribution among district fishing inspections. District fishing inspections shall register fishing gear marking symbols in special register. Fishing gear marking symbol shall have the form of rectangular plate measuring 30 x 14 mm manufactured from non-corrosive metal and shall have serial number corresponding to the regional abbreviation. Fishing gear marking symbol shall be fixed at the fishing gear in the established place and shall be sealed: 1) for the sweep-nets at the upper right wing; 2) for nets between the third and the fourth fishing floats; 3) for traps at the upper side of the mouth. Texte intégral Russe Site web www.kaznachey.com