Environmental Protection (Metal Coating) Regulations 2001. Pays/Territoire Australie Sous-division territoriale Western Australia Type du document Règlement Date 2001 Source FAO, FAOLEX Sujet Air et atmosphère, Environnement gén., Eau, Déchets et substances dangereuses Mot clé Qualité de l'air/pollution de l'air Lutte contre la pollution Protection de l’environnement Élimination de déchets Prévention des déchets Déchets dangereux Santé publique Infractions/sanctions Gestion des déchets Eaux usées/déversement Eau de pluie Aire géographique Asie et Pacifique, Australie et Nouvelle-Zélande, Océan Indien, Océanie, Pacifique Sud Résumé These regulations apply to metal coating premises described in Schedule 1 Part 2 category 81 of the Environmental Protection Regulations 1987. They allow spray painting in the open, but recommend the use of spray painting booth; conversely, powder coating must done inside a booth. Conditions and standards are set for the design, construction, installment, and maintenance of the booths. Storage of chemical must not cause pollution and liquid waste cannot escape or disposed into the environment. An operator must also ensure that solid waste is disposed of at a landfill site or waste treatment facility licensed under Part V of the Environmental Protection Act 1986. Texte intégral Anglais Site web www.legislation.wa.gov.au Références - Législation Implemente Environmental Protection Act 1986. Législation | Australie | 1986 (2020) Mot clé: Loi-cadre, Institution, EIA, Planification environnementale, Lutte contre la pollution, Autorisation/permis, Infractions/sanctions, Politique/planification, Pollution des eaux douces, Irrigation, Protection de l’environnement, Biodiversité, Préservation de l'écosystème Source: FAO, FAOLEX